Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 403)

Multi-Service IronWare Administration Guide 385
53-1003028-02
Global BGP4 commands and BGP4 unicast route commands
B
• cluster-id
• community-filter
• compare-routerid
• confederation identifier
• confederation peers
• default-local-preference
• distance
• enforce-first-as
• fast-external-fallover
• ignore-invalid-confed-as-path
• local-as
• med-missing-as-worst
• timers
The following global BGP commands are used to configure peer groups and neighbors:
• neighbor ipv4-address | ipv6-address | peer-group-name description
• neighbor ipv4-address | ipv6-address | peer-group-name distribute-list acl_name in
• neighbor ipv4-address | ipv6-address | peer-group-name distribute-list acl_name out
• neighbor ipv4-address | ipv6-address | peer-group-name distribute-list in
• neighbor ipv4-address | ipv6-address | peer-group-name distribute-list out
• neighbor ipv4-address | ipv6-address | peer-group-name ebgp-multihop
• neighbor ipv4-address | ipv6-address | peer-group-name filter-list in
• neighbor ipv4-address | ipv6-address | peer-group-name filter-list out
• neighbor ipv4-address | ipv6-address | peer-group-name next-hop-self
• neighbor ipv4-address | ipv6-address | peer-group-name password
• neighbor ipv4-address | ipv6-address | peer-group-name peer-group
• neighbor ipv4-address | ipv6-address | peer-group-name remote-as
• neighbor ipv4-address | ipv6-address | peer-group-name remove-private-as
• neighbor ipv4-address | ipv6-address | peer-group-name shut_down
• neighbor ipv4-address | ipv6-address | peer-group-name soft-reconfiguration inbound
• neighbor ipv4-address | ipv6-address | peer-group-name timers
• neighbor ipv4-address | ipv6-address | peer-group-name update-source
The following address family commands modify the behavior of BGP for a specific address family:
• aggregate-address
• client-to-client-reflection
• dampening
• default-information-originate
• default-metric
• maximum-paths
• multipath