Brocade FCoE Switch Module for IBM BladeCenter Installation and User’s Guide - Manual (Page 67)

© Copyright IBM Corp. 2010 53
Appendix C. Product Specifications
Switch components
The Brocade FCoE Switch Module switch includes the following components:
• Up to 14 internal ports as licensed
• Sixteen external ports; eight CEE, eight FC
• Two internal full duplex 100 Mbps Ethernet links for connecting to the two BladeCenter
Management Modules
• One external RJ-45 Ethernet port
• One external mini-USB console port
• Two LEDs (status, RX/TX) per external port, one switch power LED, one switch status LED
• Dual fuse circuit
• One temperature sensor
Weight and physical dimensions
Table 8 lists the physical characteristics of the high speed switch module.
High speed switch module memory
The memory installed in the high speed switch module is shown in Table 9 .
TABLE 8 Switch module specifications
Characteristic Description
Height 4.10 cm (1.61 inches)
Width 29.38 cm (11.57 inches)
Depth 25.70 cm (10.12 inches)
Weight approximately 2.13 kg (4.7 lb)
TABLE 9 Memory specifications
Memory type Value
FS8548 processor 1.2 GHz
DDR2 SDRAM Bus 1 GB running at 266 MHz with optional ECC support
Boot flash 4 MB
Compact flash 1 GB