Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 42)

Fabric Watch configuration tasks (Continued) TABLE 2
Configuration task Command Location of procedure
Set the following parameters for port
monitoring:
• Port type
• Area type
• Time base
• Threshold level
• Trigger (boundary level)
• Action (notification type)
• Buffer
• Port fencing
portThConfig
portFencing
Port Monitoring on page 65
Set the port persistence time. fwSet --port -persistence Setting the port persistence time on
page 79
Configure port fencing. portFencing Port fencing on page 79
Set the following parameters for system
monitoring:
• Class
• Area type
• Threshold level
• Trigger (boundary level)
• Action (notification type)
• Buffer
sysMonitor System monitoring using the
sysMonitor command
on page 89
Set and display the switch status policy
parameters. switchStatusPolicySet
switchStatusPolicyShow
System Monitoring on page 87
Show the overall switch status. switchStatusShow System Monitoring on page 87
Configure FRU state and notifications, and
monitor power supply, fan, and SFP FRUs. fwFruCfg System Monitoring on page 87
Display fan status. fanShow System Monitoring on page 87
Show sensor readings. sensorShow System Monitoring on page 87
Show switch temperature readings. tempShow System Monitoring on page 87
Create a detailed port report. fwPortDetailShow Generating a Port Detail report on
page 110
Show the availability of monitor information. fwSamShow Switch Availability Monitor report on
page 108
Fabric Watch Configuration
42 Fabric Watch Administrators Guide
53-1003142-01