Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 68)

Port class default settings (Continued) TABLE 16
Area Description Default threshold
settings Default alarm
settings Threshold
state
State
changes
(ST) Monitors state changes. Unit: Changes
Time Base: minute
Low: 0
High: 50
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Sync loss Monitors the number of loss of
synchronization errors. Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Protocol
errors (PE) Monitors the number of primitive
sequence errors. Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Received
packets
(RXP) Monitors receive rate, by
percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
Transmitted
packets
(TXP) Monitors transmission rate, by
percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
Link reset Monitors the number of link resets
sent by a given port (LR-Out) and
received on a given port (LR-In). Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Port Monitoring
68 Fabric Watch Administrators Guide
53-1003142-01