Brocade FC16-64 Port Blade QuickStart Guide (Supporting DCX 8510-4 and DCX 8510-8 with Fabric OS 7.3.0 and above) - Manual (Page 13)

For the DCX 8510-8, the cable management combs are mounted to the bottom of the chassis. You
need to route the cables towards the bottom and then bundle them together for each FC16-64 port
blade.
FIGURE 8 Cable routing in DCX 8510-8
For the DCX 8510-4, the cable management fingers are mounted to the sides of the chassis,
making the task of bundling and routing the cables in two directions. You can group the cables on
Installing the FC16-64
FC16-64 Port Blade QuickStart Guide 11
53-1003197-01