Brocade Virtual ADX Installation and Deployment Guide (Supporting ADX v03.1.00) - Manual (Page 20)

NOTE
The ESX host associates a default port group (VM Network) with all the Brocade Virtual
ADX interfaces. You must create different port group associations before you deploy the
Virtual Appliance because the default association by the ESX host could lead to
undesirable results (loops). If Brocade has assigned alternate port group names, you may
use them or modify them to suit your needs.
Brocade Virtual ADX installation validation
You can execute the following steps to ensure that the Brocade Virtual ADX is installed correctly.
Power on and access the Virtual Machine from the vSphere client.
1. In the left pane, select the Brocade Virtual ADX VM that you installed.
2. From the Summary tab, click Power On in the Commands area. You can also right click the VM in
the left pane and follow the dropdown menu to Power On .
3. Click on the Console tab.
You should see the following output (or similar) on your screen.
Welcome to Brocade Virtual ADX:
Virtual ADX login:
Brocade Virtual ADX installation validation
20 Brocade Virtual ADX Installation and Deployment Guide
53-1003241-01