Server load balancing in in-line topology, Deploying slb in in-line topology, Configuring slb in an in-line topology – Brocade Virtual ADX Installation and Deployment Guide (Supporting ADX v03.1.00) User Manual
Page 74
Virtual ADX(config-vif-2)#exit
Virtual ADX(config)#server real rs1 192.168.1.10
Virtual ADX(config-rs-rs1)#port http
Virtual ADX(config-rs-rs1)#exit
Virtual ADX(config)#server real rs2 192.167.1.10
Virtual ADX(config-rs-rs2)#port http
Virtual ADX(config-rs-rs2)#server virtual v1 192.166.1.10
Virtual ADX(config-vs-v1)#port http
Virtual ADX(config-vs-v1)#bind http rs1 http rs2 http
Server Load Balancing in In-line topology
Deploying SLB in In-line topology
FIGURE 26 Deploying SLB in In-line topology.
Configuring SLB in an In-line topology
Virtual ADX#config term
Virtual ADX(config)#vlan 100
Virtual ADX(config-vlan-100)#untag eth 1
added untagged port ethe 1 to port-vlan 100.
Virtual ADX(config-vlan-100)#router-interface ve 1
Virtual ADX(config-vlan-100)#int ve 1
Virtual ADX(config-vif-1)#ip address 192.168.1.9 255.255.255.0
Virtual ADX(config-vif-1)#exit
Virtual ADX(config)#server real rs1 192.168.1.10
Virtual ADX(config-rs-rs1)#port http
Server Load Balancing in In-line topology
74
Brocade Virtual ADX Installation and Deployment Guide
53-1003241-01