Elitegroup X20II User Manual
Page 63
Advertising
■ chapter 4 upgrading your computer
8.
Re-attach the metal cover to the new hard drive and
tighten 4 Screw C’s.
9.
Re-attach the HDD module to the HDD connector. And
re-attach Screw B.
10.
Put the System Device Cover back and re-attach 7
Screw A’s.
Congratulations! You have now completed the hard drive
upgrade. When you boot up the PC, you may need to create a
primary HDD partition and reformat the new drive and re-install
O/S, drivers, and all the necessary applications.
4-5
Advertising