Elitegroup X20II - Manual (Page 71)

■ chapter 4 upgrading your computer
socket. Then press it firmly so that the contact edge is driven
into the receiving socket.
6. Pivot the DIMM until the latches on both sides of the
socket snap into place.
Note:
Notice the notch on the DIMM. The notches should fit nicely with the
socket.
7. Put the Metal Cover back and tighten 2 Screw E’s. Put
the keyboard back to its original position. Make sure the edge
of the keyboard now resides under the spring-loaded latches.
4-13