Elitegroup EZ-Buddie2 D21 I4-3 Manual - Manual (Page 36)

32
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to set the typematic
rate and the typematic delay settings for your keyboard.
•
Typematic Rate (Chars/Sec): Use this item to define how many
characters per second are generated by a held-down key.
•
Typematic Delay (Msec): Use this item to define how many milli-
seconds must elapse before a held-down key begins generating
repeat characters.
Security Option (Setup)
If you have installed password protection, this item defines if the password is
required at system start up, or if it is only required when a user tries to enter
the Setup Utility.
•
APIC Mode (Enable) :This option enables/disables APIC
(Advanced Programmable Interrupt Controller) functionality. The
APIC is an Intel chip that provides symmetric multiprocessing (SMP)
for its Pentium systems.
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system. Otherwise, leave this item at
the default.
HDD S.M.A.R.T Capability (Disabled)
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system
is a diagnostics technology that monitors and predicts device performance.
S.M.A.R.T. software resides on both the disk drive and the host computer.
Report No FDD For WIN 95 (No)
Set this item to the default if you are running a system with no floppy drive and
using Windows 95; this ensures compatibility with the Windows 95 logo certifi-
cation.
Full Screen Logo Show (Enabled)
Select disabled when you want to show POST messages during boot up.
Small Logo (EPA) Show (Disabled)
Enables or disables the display of the EPA logo during boot.