Elitegroup EZ-Buddie2 D21 I4-3 Install v.2 - Manual (Page 3)

3
Enabling EZ-Watcher
If you are not familiar with a PC and its operation, you may accidentally lose all data in the PC by using the Magic Tuner
function. This is why the default factory setting of the Magic Tuner is off. To enable the setting, you have to enter the BIOS
setup program, change the setting of the “EZ Over clock” to “Enable”, and save the change before using the function. If you
do not know how to adjust the BIOS, you should find someone familiar with this to help you to enable the Magic Tuner,
allowing you to adjust the CPU speed.
1. Please go to the BIOS menu and find the ” PC Health Status” item
2. The Default setting of “EZ-Watcher Clock adjust” is “ Disabled ”