HATZ Diesel 2G40 H - Manual (Page 11)

4.1.3. Fuel
8
Stop the engine before refuelling.
Never add fuel near a naked flame or
a source of sparks. Don't smoke. Use only pure
fuel and clean filling equipment. Take care not
to spill fuel.
Diesel fuel complying with the minimum require-
ments of the following specifications may be
used:
EN 590 or
BS 2869 A1 / A2 or
ASTM D 975 - 1D/2D
Important !
The use of fuels of different specifications
requires the prior written consent of the HATZ
headquarters.
9
Before starting for the first time or if the fuel
system was run dry, prime it by operating lever
„1“ on feed pump „2“ until fuel is heard to flow
back into the fuel tank through the return line.
At temperatures below 0 °C, winter-grade fuel
should be used or paraffin added to the fuel well
in advance.
Lowest ambient
temperature when
starting, in °C
Paraffin content for:
Summer Winter
fuel fuel
0 up to –10 20 % –
–10 up to –15 30 % –
–15 up to –20 50 % 20 %
–20 up to –30 – 50 %
10