Hired-Hand RollSeal Rolling Dampers - Manual

ROLLING DAMPER
RollSeal Shutter
RollSeal, INC. • 1751 Co Road 68 • Bremen, Alabama 35033 • Phone 256-287-7000 • Fax 256-287-7010
Sheet No. 4801-0158 Rev 4-04 Page 1 of 5
Overall Shutter Dimensions
Size A (in) A (cm) B (in) B (cm)
24" Mega Flow 41 104.1 34 86.4
36" Mega Flow 53 134.6 46 116.8
36" Funnel Flow 55 139.7 48 121.9
48" Mega Flow 65 165.1 58 147.3
48" Funnel Flow 67 170.2 60 152.4
52" Mega Flow 67 170.2 62 157.5
Clear Opening Dimensions
Size C (in) C (cm) D (in) D (cm)
24" Mega Flow 28 71.1 28 71.1
36" Mega Flow 40 101.6 40 101.6
36" Funnel Flow 42 106.7 44 111.8
48" Mega Flow 52 132.1 52 132.1
48" Funnel Flow 54 137.2 56 142.2
52" Mega Flow 56 142.2 56 142.2
NOTICE
Use Of This Product In Timer Fan
Applications Will Void The
Manufacturer’ Warranty.
Tools Required: Power Specifications:
S Warning!
Disconnect All Power Sources Before Installing This Piece Of Equipment. Failure To
Disconnect Power Source Can Result In Property Damage, Serious Injury, Or Death.
1. Fig. 1 below gives dimensions of rolling damper systems.
6-5/8 in.
6.6 cm
3 in.
7.6 cm
A
B
R
2 in. (5.0 cm)
4-5/8 in.
11.7 cm
Fig. 1
Rolling Damper
D
C
!
3/8 in. (10 mm) Power screwdriver
(Portable) Lag bolts
(supplied)
Power Supply Fan Connection
3/16 in. (5 mm) Drill bit & power drill Socket 115/230 VAC, 1.6A Max 115/230 VAC
Sheet metal screws Tape measure
50/60 Hz 50/60 Hz
Carpenter's level
LIMITED WARRANTY
All products are warranted to be free from defects in material and workmanship for a period of one (1) year or 100,000 cycles, whichever occurs first, from the date of
purchase if installed and used in strict accordance with the installation instructions. Liability is limited to the sale price of any products proved to be defective or, at
manufacturer's option, to the replacement of such products upon their return. No products are to be returned to the manufacturer, until there is an inspection and/or a
return goods authorization (RGA) number is issued. All concerns should be directed first to the authorized distributor who sold the product. If satisfaction is not
obtained or the name of the distributor is not known, write the manufacturer that appears below, directed to the attention of Customer Service Manager. This limited
warranty is expressly in lieu of any and all representations and warranties expressed or implied, including any implied warranty or merchantability or fitness for a
particular purpose. The remedy set forth in this limited warranty shall be the exclusive remedy available to any person. No person has authority to bind the
manufacturer to any representation or warranty other than this limited warranty. The manufacturer shall not be liable for any consequential damages resulting from the
use of our products or caused by any defect, failure or malfunction of our products. (Some areas do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you). This warranty gives you specific legal rights and you may also have other rights that vary from
area to area.