Hired-Hand Circulation and Stir Fans: Post Mount Assembly For 52 Orifice Fans - Manual

Post Mount Assembly
For 52” Orifice Fans
HIRED-HAND MFG., INC. • 1733 County Road 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4802-5084 rev 6-07 Page 1 of 4
DANGER
Failure To Follow These Instructions May Result in Injury
Or Death!
1. Disconnect Electrical Power Source To The Orifice
Fan Before Installation Or Adjustment / Positioning.
2. Do Not Install Orifice Fan Within Range Of Human
Or Animal Contact.
Tools Required
3/8 in. (10 mm) Power Screwdriver (Portable)
7/16 in. (11 mm) Wrench Ladder
9/16 in. Wrench 7/16” Socket
3/4 in. Wrench 3/4” Socket
FIGURE 1
Post Mount Assembly
(Shown Assembled To A 52” Orifice Fan)
DESCRIPTION
The Hired-Hand Post Mount Assembly provides a
method of mounting an Orifice Fan while allowing
vertical and horizontal directional positioning.
Two adjustment bolts on the sleeves allow vertical tilting
of the fan. Two adjustment bolts on the Arm/Mounting
Bracket secure or allow horizontal positioning of the fan.
Once installed, the bolt installed on the end of the arm
helps to prevent fan movement past the end of the arm.
The Post Mount Kit is a cost effective and easy to install
attachment for allowing specific fan direction positioning.
FIGURE 2
This manual supplies instructions to install the Post
Mount Kit onto a 52” Orifice Fan and also provide
adjustment instructions.
The Post Mount Assembly is shipped with a Base
Bracket, Arm, Left and Right Swivel Sleeve Brackets,
and various hardware necessary to attach the Assembly
to a 52” Orifice Fan.
The Base Bracket can be mounted to a round or square
column with the appropriate customer-supplied
hardware.
WARNING
The Post Mount Assembly Must Be Mounted To A
Structurally Sound Column Or Mounting Surface!
Failure To Mount To A Reliable Column / Surface May
Result in Fallen Equipment, Equipment Damage, Injury,
Or Death.
When components are received, check for damaged,
loose, or missing parts. Reference the included parts list
for a complete list of kit components. Refer to Table A.
!
Arm To
Wall
Mounting
Bracket
!
Top View
Front View
Side-to-Side
Adjustment
Tilt
Adjustment