Troubleshooting, Feeding problems, Caution – Lincoln Electric IM677 RED-D-ARC LN-25 User Manual
Page 27
LN-25
E-3
E-3
TROUBLESHOOTING
Rough wire feeding or wire not
feeding but drive rolls turning.
1.
Gun cable kinked and/or
twisted.
2.
Wire jammed in gun and cable.
3.
Incorrect size or installation
of drive roll and guide tubes.
4.
Drive roll loose.
5.
Gun cable dirty.
6.
Worn drive roll.
7.
Electrode rusty and/or dirty.
8.
Worn nozzle or cable liner.
9.
Partially flashed or melted
contact tip.
10. Incorrect idle roll pressure.
11. Wire reel brake tension set
too high.
RECOMMENDED
COURSE OF ACTION
FEEDING PROBLEMS
POSSIBLE
CAUSE
PROBLEMS
(SYMPTOMS)
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely,
contact your local authorized field service facility for technical troubleshooting assistance before you proceed.
CAUTION
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Authorized
Field Service Facility.