LT Security LTD7708 User Manual
Page 24
24
24
INSTRUCTION MANUAL
11 ADVANCE
Use the Advanced Setup menu to configure alarm settings, motion detection,
mobile surveillance, PTZ settings and network settings. The Advanced Setup menu
contains the following sub-menus:
Alarm, Info, MD, Mobile, System, PTZ, and Network.
Figure 2.4.2.11 Video/Audio menu
12 ALARM
Use the Alarm menu to configure alarm and email settings.
NOTE: External alarm devices must be connected to the alarm block on the rear panel of
the system in order to use the I/O (input/ output) alarms of the system.
Figure 2.4.2.12.1 Alarm setup menu
To configure alarm settings:
1） Under I/O CHANNEL, select
NO (Normal Open), NC (Normal Closed), or OFF.
Click
NEXT PAGE to view additional channels (8-channel models only).
2) Apply loss alarms to the following:
•
HDD LOSS: The alarm will sound if the internal HDD is damaged
•
HDD SPACE: The alarm will sound when the HDD is full (overwrite must be
disabled)
•
VIDEO LOSS: The alarm will sound when a camera is disconnected
3) Under ALARM MANAGE, configure the following:
•
OUTPUT: Set the output time (in seconds) on the spot monitor from 0s, 10s,