LT Security LTD7708 - Manual (Page 25)

25
25 INSTRUCTION MANUAL
20s, 40s, or 60s.
•
BUZZER: Set the time (in seconds) for the buzzer when an alarm is triggered
— 0s, 10s, 20s, 40s, or 60s
NOTE: Set the buzzer to 0s if you want to disable the alarm during motion detection
• POST REC: Set the time (in seconds) for the system to record after a triggered
alarm— 0s, 10s, 20s, 40s, or 60s
4) Click APPLY. Click CLOSE in the confirmation window.
EMAIL SETUP：
The system can send an email notification with a JPEG snapshot for triggered events
on the system.
Figure 2.4.2.12.2 Email Setup menu
To setup email notification:
1) Under EMAIL, select ON.
2) Under SSL, select OFF.
NOTE: SSL deals with encryption. Only advanced users should enable this option.
3) Under SMTP PORT, enter the SMTP port of your email server.
4) Under SMTP, enter the SMTP address of your email server. For example,
smtp.gmail.com
5) Under SEND EMAIL, enter the sender email address.
6) Under SEND PW, enter the
password of your email server.
7） Under RECV EMAIL, enter the email address that will receive the email
notification.
8） Click APPLY. Click CLOSE in the confirmation window.
9) Click EXIT in all menus until all windows are closed.