LT Security LTD7708 - Manual (Page 49)

49
49 INSTRUCTION MANUAL
4.4 HDD INSTALLATION
Caution:
When working with electrostatic sensitive devices such as hard disk driver or DVR unit,
make sure you use a static-free workstation. Any electrostatic energy coming in contact
with the hard disk or DVR can damage it permanently.
Please install the HDD following these steps:
1）Open the cover of the DVR and then you will see one HDD plate as follow.
2）Connect HDD cables as follow
3）Affix HDD onto HDD plate as indicated below with the screws provided.
4）Install the HDD plate back into DVR and close cover .
Notice: New installed HDD should be formatted before recording.