1 camera, 2 record – LT Security LTD831H6 User Manual

Page 12

Advertising
background image

9

5.2.1 Camera














Explanation
1、The modification to sub-menu will be available after clicking [APPLY] button on the bottom of the sub-menu

windows and being prompted successful save and then clicking [ok] button again.

2、If you want to cancel the modification, please click [Exit] button to exit the menu.
3、When clicking [DEFAULT] button, all system default value will be recovered to default value.
4、System default value indicates ex-factory default parameter value.

5.2.2 Record








Guideline generally indicates optional parameter value of previous menu

.

The [Record Setup] menu allow you set up recording on/off status of each channel, also allows you setup image

resolution, quality and audio on/off; at the same time, the menu allows you select recording mode ( recording after
power on and scheduled recording) and recording Pack time.

One channel is set to “on” means the channel could proceed recording, on the contrary, “off” means the channel

be forbidden recording. Resolution allows you select D1, HD1 and CIF; and Quality includes three levels- better,
good and Normal.

Enter into [Main Menu  Camera] to set up name and position of

each channel (Shown as Picture 5-3), Furthermore, you could also adjust
image brightness, saturation, contrast and hue parameters of each channel
after entering into [Color] Menu and set up if each channel could be
previewed or not under Live display and/or Recording mode.

Please note that the name of each channel supports up to eight

characters or four Chinese characters.

Click [Main Menu] [Record] to enter into [Record Setup] menu

(Shown as Picture 5-5)

Explanation
1. The [Exit] button allows you come back to previous menu or

main interface.

2. [PACK time] indicates maximum continuous time length of

recording file (15、30、45、60min).

In addition to illustrating picture, Parenthesis shown as User

Picture 5-3

Picture 5-4

You could also adjust image brightness, saturation, contrast and hue

parameters of each channel after entering into sub-Menu -
[Color].(shown as picture 5-4)

Picture 5-5

Advertising