LT Security LTD831H6 - Manual (Page 21)

18
Firstly you need to install widget provided by attached CD disk and copy the file with suffix “QQeye.CAB” to
mobile phone (also you could transmit the widget and file with “QQeye.CAB” to mobile phone via blue-tooth
technology).
6 Setting：Click [Setting] button to enter into Setting menu.
7 Main interface operation：
Display on the left corner: Network transmission speed, Frame rate and resolution rate.
Display on right corner: percentage of buffer display, connection success, connection fail, play and stop.
Button function under the video image from left to right in turn: PTZ control (Left, right, up and down), area select
(Zoom out and zoom in), Focus (Add “+” and deduct “-”) and Iris (Add “+” and deduct “-”)and snap
9 Display mode:
You could convert normal display into
full-screen display by clicking the screen of
mobile phone
2. Click the widget you need to
install and choose a location to
install “digitalsal QQeye” after
finishing initialization detection.
The file is generally faulted to
save as storage card of mobile
phone (shown as be low picture)
If you have set user name, password, server, web port and MP parameter on DVR
correctly, you enter into main interface and select any channel freely, at this moment, video
will be connected automatically.
Click [Disconnect] button to connect live image of the channel.
Click [Setting] button to modify parameter setting manually.
8、Video connection Display
Normal Mode: You will find network connection status info under the video image:
3、Choose defaulted device and
click[Install] button to start the
installation (please refer to
below installation processing
display.)
4. After installation finished,
please click the icon named
QQeye to run the widget. 5、Initial Interface
User name: same as user name set to DVR
Password: same as password set to DVR.
Server address: IP address or DDNS of DVR connected to public network
Web port: Same as other web port setting, you need to map the web port to Router. Setting
range is between 1024 and 65535. Please note the port number not equal to other web port
setting under the IP address
Channel: Select the channel you want to monitor and click [OK] button to start video
connection.