LumaSense Technologies IN 520 - Manual (Page 25)

Series IN 500 Operating Manual Device Settings 25
4.3 Settings with HT 6000 (accessory)
The HT 6000 is a portable battery driven instrument for
the parameter setting of digital pyrometers and for
indication of temperature.
The pyrometer has to be connected to the
HT 6000 via its interface cable (RS232 or RS485) with
the female SUB-D connector. When the HT 6000 is
switched on, it automatically recognizes the pyrometer
and allows the preset parameters to be displayed. With
the “PAR” button the different parameters can be
called in the sequence described on section 4.1
Parameters. With the arrow buttons, the values of
the parameters can be selected and confirmed with the
“ENTER” button. If no button is pressed for 30 s the
HT 6000 changes to the temperature indication
without accepting the changed value.