Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 17)

MWN-WAPR150Nv2
12
default is “password” and you can change it whenever you want.
3.4 Default Wireless Settings
Your Medialink router is set by default to have a Wireless SSID “medialink”. This is the
name of your network that will appear in a list to choose from on any device in range of
the router.
The default wireless security settings on your router are WPA-Personal using AES
Algorithm for encryption. You can choose to you other security methods in the Advanced
Settings. The password otherwise known as “Network Key” or “WPA Key” is set to
“password” by default. This can be changed but please note it is case sensitive and must
contain at least 8 characters.
(For advanced setting or to disable wireless security, please refer to Chapter 5.2).
Chapter 4 Advanced Settings
4.1 System Status
The System Status screen allows you to view the router’s (blue) WAN port status and
system status.

Connection Status: This displays the router’s WAN connection status.
Disconnected: indicates the router’s WAN port has not been connected with a
network cable.
Connecting: indicates the router’s WAN port is obtaining an IP address.
Connected: indicates the Router is connected with your ISP or modem.

WAN IP
：IP address obtained from ISP, modem, or router.

Subnet Mask: Obtained from ISP, modem, or router.