Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 23)

MWN-WAPR150Nv2
18

LAN MAC Address: The Router’s LAN MAC Address, which is unchangeable.

IP Address: The Router’s LAN IP Address (not your PC’s IP address and not the
WAN IP Address that your router acquires from your modem/ISP). The default
value is 192.168.8.1. You can change this when necessary.

Subnet Mask: The Router’s LAN Subnet Mask. The default value is
255.255.255.0

Click “Apply” when finished.
NOTE:
Once you modify the IP address, you need to remember it for next time you log in to the
web-based utility. If your computer loses access to the router after you change the LAN
IP Address, you will need to refresh the computer’s connection to the router.
Disabling/Enabling the Local Area Connection is one way to do that.
4.4 MAC Clone
This page is for the Router’s MAC Address that is registered to the WAN connection.
Some ISPs require the end-user’s MAC Address to access their network. This page will
allow your router to copy the MAC Address of your connected computer to the router so
that your ISP connection will work properly.