Rhino Shelter ROUND-12W X 20L X 8H - Manual (Page 2)

Assembly Instructions Round Style 12 x 20 x 8
V2.3
Please Do NOT Return Assembly to Dealer or Store. For All questions or Shortages please call MDM Products directly
Customer Service 800-447-7079 or 203-877-7070
2
Note: All Side and Base Ridge Poles MUST be on Inside
of Arch Frame Members. Top Ridge Poles MUST be on
Outside of Arch Frame members, except at Ends. See
Frame Assembly Step 5. 2 H CW-1800 Corner Wind Brace
20 C SCR-2030 Swedged Cross Ridge Poles
5 D ECR-2031 End Cross Poles – plain ends
8 TB-3004 Turnbuckles
30 CBN-3005-3 Carriage Bolts – 3 1/4”
2 CBN-3005-2 Carriage Bolts – 2 ¼”
32 CBN-3005-N 9/16” Nuts
32 CBN-3005-
W
Washers – 9/16” Cupped
2 R-3003 3/16” Rope
4 BC-36 Bungee Cord Hold Ups
6 DBA-3000 Earth Cable Anchors
6 UB-3002 U Bolts with Nuts
1 DR-3001 36” Drive Rod
4 EP-1000 1-5/8” Plastic End Plugs
10 EP-1001 1” Plastic End Plugs
P
u
a
#G
#D
#A
#D
#E
#C
#A
#C
#E
#D
#C
#A
#C #E
#C
#C
#C #E
#C
#C
#A
#C #F
#C
#A
#C
#B
#B
#B
#B
#B
#B
#H
#G
#D
#H
#D
#E
#C
#E
#C
#C
#C
#E
#E
#C
#C
#C
#F
#C
#A
End Arch with Foot
Top Ridge Rail
Base Cross Rail
Wind Brace
Right Side
Crest Tube
Left Side Crest
Tube
Interior Arch
Side Cross Rail
SITE PREPERATION
Select a level or as close to level as practical location for
your Rhino Shelter unit. The unit should be placed on a
base of materials suitable for the storage load to be
protected. The unit should not be located under trees, which will shed hard fruit such as apples, walnuts, or
heavy pine cones. The cover of your unit will protect
against normally leaves and light debris, however large
branches or other falling items may cause puncture or
tears in the cover material.