Rhino Shelter ROUND-12W X 20L X 8H - Manual (Page 9)

Assembly Instructions Round Style 12 x 20 x 8
V2.3
Please Do NOT Return Assembly to Dealer or Store. For All questions or Shortages please call MDM Products directly
Customer Service 800-447-7079 or 203-877-7070
9
Cleaning – cover and doors can be cleaned with a
mixture of light detergent and water. A soft bristle brush
with the mixture can be used to loosen any hard dirt,
mold, or buildup on the cover. After cleansing, the cover
should be rinsed thoroughly to avoid any chemical
reaction from residual detergent. Allowing dirt and
debris to sit on cover over an extended time will damage
cover irreparably.
Severe Weather – in preparation for inclement weather,
completely secure the doors on both ends of your Rhino
Shelter garage. Allowing wind to enter either end lifts
the building and puts undue stress on the anchoring
system. This also shortens the life of the doors, zippers,
and main cover.
CUSTOMER SERVICE OR INSTALLATION
Please call MDM Products at 800-447-7079 or 203-877-
7070 for questions about the installation of the unit in
any way. Care and attention to a proper installation will
add many years of life and function to your Rhino Shelter
unit.
Please retain purchase documentation for your Rhino
Shelter unit. All warranty claims must include purchase
documentation for verification. All parts on your Rhino
Shelter unit are available for replacement as needed.
Protect your purchase by completing warranty
registration card and mail/fax as soon as practical after
installing your unit.