Rhino Shelter HOUSE-14W X 42L X 15H - Manual (Page 11)

Assembly Instructions RV Style 14 x 42 x 15
V 2.2
Please Do NOT Return Assembly To Dealer or Store. For All Questions and assistance, contact MDM Products directly.
Customer Service 203-877-7070 or 800=447-7079
11
CUSTOMER SERVICE & ASSISTANCE
Please call MDM Products at 800-447-7079 or 203-
877-7070 for questions about the installation of the
unit in any way. Care and attention to a proper
installation will add many years of life and function
to your Rhino Shelter unit.
Please retain purchase documentation for your
Rhino Shelter unit. All warranty claims must include
purchase documentation for verification. All parts
on your Rhino Shelter unit are available for
replacement as needed. Protect your purchase by
completing warranty registration card and mail/fax
as soon as practical after installing your unit.
RV 14X42X15 INVENTORY CHART
I t e m N u m b e r Part Number Description Q u a n t i t y
1 CT-8006 Top Crest and Side Bend 33
2 RP-8007 Rafter Pole – swedged both ends 22
3 UP-8008 Upper Leg Pole 22
4 EUL-8002 Lower Leg Pole with Foot 8
5 EUL-8003
Lower Leg Pole plain end
14
6 CW-8005 Corner Wind Brace 4
7 ECR-8003 End Cross Rails – Plain Ends 7
8 SCR-8004 Cross Rail Pieces – swedged one end 63
9 EP-1001 End Plug 1” 14
10 EP-1003 End Plug 2-3/8” 8
11 CBN-7005-4 Carriage Bolt – 3/8”X 4” 77
12 CBN-7005-CW Curve Washer – 3/8” 135
13 CBN-7005-3 Carriage Bolt – 3/8”X 2-7/8” 66
14 CBN-7005-W Flat Washer- 3/8” 8
15 CBN-7005-N Locknut 3/8” 143
16 TB-3004 Galvanized Turnbuckles 8
17 R-7003 3/16” Rope 2
18 DBA-3 000 Earth Cable Anchors 22
19 UB-3002 U Bolt w/ Nuts 22
20 DR-3001 36” Steel Drive Rod 1
21 ** Door Bottom Pipe 1” X 72” Plain End 2
22 ** Door Bottom Pipe 1” X 72” Swedged
One End
1
23 ** Roller Pulley 4
24 ** Rope for Door ¼“ X 49’ 2
25 ** Bolt ¼”X 1-3/8” 4
26 ** Self Tapping Screw ¼”X ½” 4
27 ** Tie Off Rope Cleat 2
28 MUC-8000 Main Cover 1
29 DZD-8000 End Panel Door – Double Zipper 2
** - Designates Parts in Roll Up Door Kit