RIKON Power Tools 25-010H - Manual (Page 2)

2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specifications, photographs, drawings and information in this manual represent the current model
when the manual was prepared. Changes and improvements may be made at any time, with no obligation on
the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to
ensure that the information in this manual is correct, to provide you with the guidelines for the proper safety,
assembly and operation of this machine.
Motor .............................................................................................1-1/2 HP, TEFC
Motor Speed (no load).......................................................................... 3,400 RPM
Volts .................................................................................................... 110 / 220 V
Amps, Hertz ....................................................................................12 / 6 A, 60 Hz
Cutterhead Diameter .................................................................... 2-1/2" (63 mm)
Cutterhead Speed (RPM / CPM)....................................4,800 RPM / 19,200 CPM
Number of Carbide Inserts, 4-sided.................................................................... 44
Knife Insert Size (L x W x T) ...................................................0.59" x 0.59" x 0.10"
Maximum Depth of Cut (Planing & Jointing) .................................. 1/8" (3.18 mm)
Maximum Cutting Width (Planing & Jointing)....................................10" (255 mm)
Maximum Cutting Depth (Planing Height) ....................................6-1/4” (160 mm)
Planer Table Size ...............................................10-1/4" x 15-3/4" (260 x 400 mm)
Feed Speed Planing SF/min ......................................................24.6 (7.5 SM/min)
Jointer Table Size ...................................................11" x 40-1/2" (280 x 1003 mm)
Fence Size .......................................................................4" x 24" (100 x 610 mm)
Fence Tilting Degree ................................................................................... 0 - 45°
Dust Port ...............................................................................4” Diameter (95 mm)
Dust Collection Minimum CFM ........................................................................ 650
Overall Size (LxWxH).....................49-1/4" x 19" x 34" (1251 x 863.6 x 482.6 mm)
Base / Stand Size (approx.) .................................... 22” x 22-5/8” (560 x 575 mm)
Net Weight ......................................................................................147 lbs (67 kg)
Specifications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine ..............................................................................................7
Contents of Package .....................................................................................................7 - 8
Installation ......................................................................................................................8
Assembly .................................................................................................................... 9 - 11
Adjustments...............................................................................................................11 - 17
Operation ..................................................................................................................18 - 20
Maintenance ....................................................................................................................21
Electricals & Wiring Diagram .......................................................................................5 & 21
Troubleshooting .........................................................................................................22 - 23
Parts Diagrams & Parts Lists ..................................................................................24 - 29
Accessories ..........................................................................................................30
Notes ...............................................................................................................................30
Warranty ..........................................................................................................................31