RIKON Power Tools 25-010H - Manual (Page 7)

GETTING TO KNOW YOUR MACHINE
CONTENTS OF PACKAGE
H
A On / Off Safety Switch
B Cutterhead Guard
C Jointer Dust Port - Work Position
D Outfeed Table
E Jointer Fence
F Infeed Table
G Jointer Depth of Cut Adjustment Knob
H Cutterhead Guard Height Adjustment Lever
I Jointer Depth of Cut Scale
J Planer Table Height Adjustment Handle
K Jointer Fence Support
L Planer Dust Port - Work Postion
M Outfeed Table Lock Handles
N Planer Table
O Planer Depth Gauge
P Power Cord
7
Model 25-010H Planer/Jointer is shipped complete in one box.
Unpacking and Clean-up
1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to make sure
that all of the items are accounted for, before discarding any packing material. Place parts on a protected surface
for easy identification and assembly. If any parts are missing or broken, please call RIKON Customer Service (877-
884-5167) as soon as possible for replacements. DO NOT turn your machine ON if any of these items are missing.
You may cause injury to yourself or damage to the machine.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces with ordinary house hold type grease or spot remover. Do not use; gasoline, paint
thinner, mineral spirits, etc. These may damage painted surfaces.
4. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth. Be careful
when reaching inside of the planer as the knives are sharp and may cause injury if touched.
FRONT VIEW - JOINTER SETTING REAR VIEW - PLANER SETTING
A
E
B
D
F
C
H
G
J
K I
L
M
B
N
O
P