RIKON Power Tools 30-100 - Manual (Page 10)

Assembly
10
Fig.09
10. Loosen the motor lock knob (A-Fig.10). Move
the motor (B-Fig.10) manually toward the
feed handle to take tension off of the belt.
Fig.10
A
B
11.Move the drive belt to the desired speed
position, refer to speed chart inside belt cover.
Manually move the motor away from the feed
handle until the belt is tensioned, tighten
motor lock knob. The belt is properly
tensioned when the deflection distance is 1/2”
when pushed by hand (Fig.11).
Fig.11
Adjustments
9. Changing Spindle Speed: The 30-100 Bench
Drill Press has five spindle speeds. To change,
lift the cover with the handle (A-Fig.09).
A