RIKON Power Tools 30-100 - Manual (Page 5)

5
Contents of Package
Unpacking and Checking Contents
Item Description
1 Drill Press Head
2 Base
3 Table
4 1/2” Chuck
5 Chuck Key
6 Hardware Bag
(See Contents Below)
7 Feed Handle
8 Column
Item Description
9 Table Lock Handle
10 Column Mounting Bolts
11 3mm Hex Wrench
12 4mm Hex Wrench
13 6mm Hex Wrench
14 Feed Handle Bolt
15 Owner’s Manual
8” Bench Drill Press
Model: 30-100
Owner
’s Manual
For more information:
www.rikontools.com or [email protected]
For Parts or Questions:
[email protected] or 877-884-5167
Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
Part # 30-100M2
Unpack your drill press from its carton and check to see that you have all of the following items. Set
packing material and shipping carton to the side. Do not discard until machine has been set up and
is running properly.
Do not turn your machine ON if any of these items are missing. You may cause injury to yourself or
damage to your machine. If parts are missing contact RIKON customer service at 877-884-5167 or
[email protected].
1
2 3 4 5 6
7
8
9
10
14
11
12
13
15