RIKON Power Tools 30-120 - Manual (Page 5)

Model 30-120 13” Bench Drill Press is shipped
complete in one box.
1. Unpacking and Checking Contents
a. Separate all “loose parts” from packaging
materials and check each item with “Table of
Loose Parts” to make sure all items are
accounted for, before discarding any packaging
material.
b. With the help of another person, carefully lift
the Drill Press head out of the box.
c. Remove protective oil that is applied to the
table and column before assembly. Use any
ordinary house hold type grease or spot
remover.
d. Apply a coat of paste wax to the table and
column to prevent rust. Wipe all parts
thoroughly with a clean dry cloth.
TABLE OF LOOSE PARTS
Item Part Name Qty
A Drill Press Head 1
B Arm 1
C Table Support 1
D Table 1
E Column Assembly 1
F Base 1
G Loose Bag 2
H Chuck 1
I Owner’s manual 1
J Cast iron handle 1
Contents of Package
Tools required for assembly
1. Allen wrenches (provided).
2. Rubber mallet or block of wood and hammer.
3. Adjustable wrench or open end wrench.
4. Household grease remover.
5. Hex. Wrench (provided)
5
A
B
C
D
E
F
J
G
H I