Assembly – RIKON Power Tools 34-250 User Manual
Page 9
Advertising
9
Assembly
3. Place the riser block (A-Fig.06) over the fence
rack bar
(B-Fig.06). Align the four through
holes of the riser block with the four threaded
holes in the base (C-Fig.06).
Fig.06
A
B
4. Re-install the column to the base by threading
the four
hex bolts M8-1.25 x 80 through the
holes in the riser block.
(A-Fig.07)
Fig.07
A
A
5. Next replace the short hold down support rod
for the long hold down support rod. (Fig.08)
Fig.08
C
Advertising