Seca 677 - Manual (Page 79)

Before you really get started ... • 79
English
Setting filtering (Fil) Filtering (Fil) allows you to reduce interference (e.g. as a
result of patient movement) when determining weight.
1. Select the item "Fil" from the menu.
2. Confirm your selection.
The current setting is displayed.
3. Select a filtering level.
– 0: no filtering
– 1: moderate filtering
– 2: high filtering
4. Confirm your selection.
You exit the menu automatically.
Restoring factory
settings (RESET)
You can restore the factory settings for the functions
below.
NOTE
The wireless module is switched off when fac-
tory settings are restored. Information about
existing wireless groups is retained. Wireless
groups do not have to be set up again.
1. Select the item "Reset" from the menu.
2. Confirm your selection.
You exit the menu automatically.
3. Switch off the scale.
Factory settings are restored and are available
when the scale is switched back on.
Function Factory setting
Auto hold (Ahold") Model-dependent
Beep (Press) Off
Beep (Hold) On
Filtering (Fil) 0
Autoclear (Aclear) Model-dependent
Pre-tare (Pt) 0 kg
Height for Body Mass Index
(BMI)
170 cm
Wireless module (SYS) Off
Autosend (ASend) Off
Autoprint (APrt) Off