SHARKOON Rush Power M - Manual (Page 10)

Note:
All connectors are designed fault-preventing to avoid misconnection. If you cannot
attach the female connector to the drive’s or peripheral’s male connector, please check
if both connectors are attached in the correct orientation.
Do not force to plug the female connector into the male connector in wrong orien-
tation, nor modify any of the components, as this will damage the PSU and your hard-
ware. SHARKOON warranty does not cover damage caused by incorrect handling.
5.2.2 Connecting mainboard and graphics card(s)
1. Plug the ATX power connector (fig. 1) to the respective jack on the mainboard.
fig. 1
2. In case your mainboard also provides an additional 4-pin or 4+4-pin power connector
(the so called P4 resp. P8 connector), also plug the respective connector (fig. 2).
fig. 2
Note:
The mainboard’s power connection depends on the vendor and may vary. For
detailed information on how to establish the power connection refer to your
mainboard’s manual.
RUSH POWER M