3 reset device, 4 factory default – SHARKOON USB LANPort 400 User Manual
Page 19
Advertising
USB LANPORT 100 / 400
ENGLISH
6.3 Reset device
A – Left-click the link to select the respective entry.
B – Perform a reset after entering the assigned password
into the “Password” area and confirm by clicking the
“Submit” button.
6.4 Factory Default
A
A
B
B
A – Left-click the link to select the respective entry.
B – To recover the factory default settings enter the pass-
word into the “Password” area and confirm by left-
clicking the “Factory Default” button.
Advertising
This manual is related to the following products: