SHARKOON USB LANPort 400 - Manual (Page 6)

USB LANPORT 100 / 400
ENGLISH
4. Getting started
4.1 Hardware installation
1. Connect the included patch cable to the USB LANPort’s
network connector and an available network connector of
your switch/hub/router/PC or similar.
2. Connect the included power adapter to the USB LANPort and
a wall outlet. The device will boot automatically.
4.2 Software installation (Windows for example)
1. Insert the included Tools CD into your CD/DVD drive.
2. Use the Windows Explorer to open the directory of the
inserted Tools CD.
3. Double click (left mouse button) “Setup.exe”. The installation
will start.
Follow the installation wizard’s instructions.
4. To complete the installation you will be prompted to reboot
your PC. Confirm this indication.
5. After successfully rebooting your system, the following icon
will appear on your desktop:
Double-click (left mouse button) this icon to launch the
software.
Note:
You need to install this server software on every PC from
which you want to access the USB LANPort.
6. Connect the USB device(s) to the USB port(s) of the
USB LANPort.