SHARKOON X-Tatic SR - Manual (Page 15)

7.2.2 Xbox ® 360
1. Connect the optical cable to your console and the SCU.
Note:
Some versions of the Xbox ® 360 already include the adapter cable greyed out in the drawing above.
In case your Xbox ® 360 does not include one of the cables mentioned below, you need to buy one of
them in order to connect the X-Tatic SR:
When connecting your Xbox ® using "Component Video" or "Composite Video" you require the respective
Microsoft adapter cable with TOSLINK connector.
When connecting the Xbox ® via HDMI you need the Microsoft Xbox ® 360 HDMI cable with optical audio
adapter.
You will find further information here:
http://en.wikipedia.org/wiki/Xbox_360_accessories#AV_Connectors_and_Cables
2. Connect the USB cable to the console and the SCU.
3. Connect the X-Tatic SR to the SCU.
4. Connect the chat cable to the Xbox ® 360 controller and the connector on the volume controller of
the X-Tatic SR headset.
5. Activate the optical input on the SCU.
6. Switch on your console and the SCU.
7. Inside the settings menu of your console configure the settings for sound output and microphone as
described below:

13