SHARKOON X-Tatic SR - Manual (Page 21)

7.2.3.3 with other stereo headset using the scU
Application:
You want to use another stereo headset (e.g. from another maker) with the SCU.
1. Connect the optical cable to the PC and the SCU.
2. Connect the USB cable to the PC and the SCU (power supply for the SCU).
3. Connect the headset to the analog audio output of the SCU.
4. Connect the microphone connector of the headset to the microphone input of the soundcard either
directly or using the included stereo extension cable (3.5 mm plug > 3.5 mm jack). Pay attention to
the color coding of the connectors!
5. Activate the optical input on the SCU.
6. From the audio settings menu of your PC operating system select "Optical digital out" as output
device.
Alternative:
In case your PC soundcard does not have an optical output, you may alternatively connect the SCU
using the included stereo connection cable (3.5 mm jack > 3.5 mm jack / step 1).
In this case you need to activate the analog input on the SCU. (step 4).

19