2 without scu via g6 adapter cable – SHARKOON X-Tatic SR User Manual
Page 20
7.2.3.2 without scU via G6 adapter cable
Application:
You have connected the SCU to your console and now want to use the X-Tatic SR with your PC/laptop.
1. Connect the G6 adapter cable (G6 > USB2.0 A and 2x 3.5 mm connectors) to the G6 connector of the
X-Tatic
SR.
2. Connect the USB cable to the PC (power supply of the headset amplifier).
Note:
Occasionally USB ports do not deliver as much current as specified.
This may cause your X-Tatic SR not to work as its included amplifier is not powered sufficiently.
In this case disable the amplifier of the X-Tatic SR:
After disabling the amplifier the maximum volume of the headset will be reduced.
3. Connect the audio connectors of the adapter cable to the analog audio input connectors of your
PC/laptop.
18