Source Green Heat SGH-EF450C - Manual (Page 8)

8
7. With the heater resting, you can now take the small mounting bracket, and line it up against the heater’s
underside and the wall. Mark the 2 remaining wall plug locations accordingly (Ref. Fig. 3A and 3B).
8. With a second person assisting, remove the heater and place to one side, and safely out of the way.
9. Drill the final 2 holes for the remaining plugs at your marked locations, and insert the plugs into the wall
as in step #4 above.
10. With a second person helping, re-mount the heater on to the long mounting bracket on the wall.
11. Install and secure the small mounting bracket to the heater’s underside by using the 2 small screws
provided and the 2 remaining long screws to secure to the wall plugs.
12. With a second person assisting on either side, lift, and place the front glass cover over the fire display,
assuring that each of the 4 lugs aligns to each of the 4 bracket guides (Ref Fig. 4).