Spectra Precision SP80 - Manual (Page 51)

Engl
ish
45
Email Settings button: Tap on this button to access the
email server settings (SMTP server, sender’s email
address, port ID, user name and password). This
screen includes the
Test Settings button, which can be
used to send a test email to the programmed
recipients. If the test is successful, this will confirm
that the emailing communication channel used to
report alerts is fully operational.
3. SMS tab: Allows you to enter up to 5 different phone
numbers that will receive warning SMS, should alerts
be set.
The check box placed before each phone number entry
allows you to quickly include or reject the phone
number from the SMS distribution list. You can for
example reject a phone number but keep it in memory
for future use.
Alert Level scroll-down list: Allows you to choose which
alerts should be notified to the remote operator
through SMS. See previous table for alerts
classification.
Receive Theft Alerts check box: Tell FAST Survey
whether or not theft alerts, when triggered, should be
forwarded via SMS to the registered recipients (check
the box if this is what you want, otherwise clear it).
4. Anti-Theft tab: Includes three buttons when the anti-
theft protection is inactive:
Enable Anti-Theft button: Allows you to activate the anti-
theft protection after you have entered the correct
password, as defined below.
Test Anti-Theft button: Will cause the message “ANTI-
THEFT ALARM” to appear for about 10 seconds on the
SP80 front panel screen. This test is useful to check
that there is no mistake in the entered email addresses
and phone numbers.
Anti-Theft Password button: Is used to define the
password needed to activate/deactivate the anti-theft
protection.
Once the protection has been activated and you have
refreshed the content of the
Anti-Theft tab, you will only
see one button ( Disable Anti-theft) on this tab. The
Disable Anti-theft button allows you to deactivate the
anti-theft protection after you have provided the
password.