Autostart CT-5060 - Manual (Page 6)

CT-5060 User Guide P. 6
Priority Door Access
This safety feature lets you unlock only the driver’s door when you press the
UNLOCK
button on the transmitter, and then
UNLOCK
the rest of the vehicle doors if the
UNLOCK
button is pressed for a second time within 3 seconds.
Chirp Delete
To temporarily disable the siren’s chirp confirmations upon arming and disarming (e.g. in
a quiet neighbourhood):
1. Press the
TRUNK
button.
2. Within 3 seconds, press the
LOCK
or
UNLOCK
button to arm or disarm without any
chirps.
Note : Your installer can program the Chirps Disabled feature if you want the chirps to be
permanently disabled.
User-selectable Options
The system was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system
in your vehicle.
Note : The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation of your system.
The user-selectable options are as follows:
Safe Start
Safety feature: Safe Start features will prevent accidental remote starts.
If this feature is enabled, the user must press the
START/STOP
button 2 times within 3
seconds to remote-start the vehicle.
If Swap Start Mode has been configured by your installer, to remote-start your vehicle
press
LOCK
and
UNLOCK
simultaneously. (Press
START/STOP
to trigger the
AUX 2
output.)
Safe Start features will eliminate accidental remote starts, e.g. when there are children
playing with the transmitter.
Remote Door Locks
If your system was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry.
To
UNLOCK
your doors and
DISARM
the system:
1. Press and hold the
UNLOCK
button for approx. 1 sec.
2. The parking lights will flash twice and the LED will go out to confirm that the doors
have been unlocked, that the Starter Kill feature is disarmed (if it was installed) and
that the Alarm is disabled.
To
LOCK
your doors and
ARM
the system:
1. Press and hold the
LOCK
button for approx. 1 sec.
2. The parking lights will flash once and the LED will flash slowly to confirm that the
doors have been locked, that the Starter Kill feature is enabled (if it was installed)
and that the Alarm is armed.