Star Water Systems EL10S User Manual
Page 5
5
TOOLS REqUIRED
PREPARATION
Pipe wrenches (2)
Wire strippers
Needle-nose pliers
Phillips screwdriver
Wire cutters
Adjustable wrench
Pipe tape
Pipe dope
PARTS YOU MAY NEED FOR ASSEMBLY
(not included) (Fig. 1)
Item Description
1
1-1/4 In. union
2
1-1/4 in. adapter
3
1-1/4 in. elbow
4
3/4 in. union
5
1 in. adapter
6
1 in. x 3/4 in. reducer bushing
7
3/4 in. adapter
8
1 in. elbow
9
1-1/4 in. check valve
10
3/4 in. tee (plastic)
11
3/4 in. tee (steel)
12
3/4 in. x 3 in. nipple (steel)
13
3/4 in. plug (steel)
14
Foot valve
Electric cord strain relief
OPTIONAL PARTS FOR ASSEMBLY
(not included) (Fig 2)
Item Description
1
Ball Valve (plastic)
2
3/4 in. x 1/4 in. bushing (steel)
3
Pressure Gauge
4
Pump stand for tank
NOTE: For a successful installation, take time to study your application for the correct pipe size and
appropriate fittings. The illustrations in these instructions will assist you with required and optional
fittings. Sch. 40 PVC plastic pipe and fittings were used in these instructions.
Before beginning installation of product, make sure all parts are present. If any part is missing
or damaged, do not attempt to assemble the product. Contact customer service for replacement
parts.
Estimated Installation Time: 2 hours.
1
IL1383
lıı
ılı
ııı
lıı
ılı
ııı
lııı
lııı
ılıı
ılıı
ıılııı
lııı
ılıı
ılıı
ıı
200
180
160
140
120
100
80
60
40
20
1
2
4
3
2
IL1382
12
1
4
9
14
11
13
8
10
7
6
5
3
2