AEG KO-LAVAMAT 72620 - Manual (Page 13)

Operating instructions
13
ä (STAIN )
For treating heavily soiled or stained washing. (In-wash stain treatment
is washed in from the m compartment at the optimal point in the
program cycle.)
3 When the s/P (WOOLLENS/HAND WASHING) setting is chosen, the
additional programs cannot be selected (any buttons pressed do not
have any effect).
Consumption Data and Time Required
The values given in the following table for selected programs were cal-
culated under standard conditions. They provide a useful guide for
operation in the home.
What does "update" mean?
New fabrics or new detergents could, in the future, require a new
washing technique (e. g. an additional rinse, more water to wash in the
detergent, ...).
Your washing machine is prepared for this eventuality. The controller is
fully electronic. The software in which the controller is defined can be
re-programmed.
If a new state of the art is achieved in washing technology, you can
bring your washing machine up to the latest standard with an update.
For more information concerning updates, please contact customer
service. Customer service can also inform you of the costs involved in
an update..
Program Selector/Temperature Load in kg
Water
in Litres
Energy
in kWh
Time in
Minutes
t (COTTONS/LINEN) 95 5 49 1,70 121
t (COTTONS/LINEN) 60 1)
1) Note: program setting for testing in accordance with EN 60 456
5 49 0,94 110
t (COTTONS/LINEN) 40 5 49 0,60 100
} (EASY-CARES) 40 2.5 54 0,50 82
à (DELICATES) 30 2.5 53 0,40 65
s/P (WOOLLENS/HAND
WASHING) 30
2 53 0,28 37