USGlobalsat BT-368i User Manual - Manual (Page 13)

BT-386i
Page 13 of 15
Version 1.1
13. You can start the navigation software or
GPSinfo program to check the GPS
positioning status.
5.2 Unable to Connect to Bluetooth
(1 ) Check if the Bluetooth status LED is flashing normally.
(2) Check that there is adequate battery power. If not, please recharge.
(3) Check if your device’s Bluetooth function is actually enabled.
5.3 Unable to Get a GPS Fix Signal
( 1) Check if the green GPS status LED is flashing normally.
(2) Check that there is adequate battery power. If not, please recharge.
(3) If GPS cannot obtain a fix after 10-min, use the included (or downloadable) GPSinfo utility software to
create a “Cold Start” function.
The GPS should be in an open view to the sky surrounding when performing
this task.