USGlobalsat BT-368i User Manual - Manual (Page 6)

BT-386i
Page 6 of 15
Version 1.1
2.2 LED Status Indicators
Bluetooth LED (Blue)
Status Description
Flash once per three seconds Not Connected
Flash once per second Connected
GPS LED (Green)
Status Description
Flash once per second Position is Fixed
Steady on Position Not Fixed
Power LED (Red/Orange)
Status Description
Red light steady on Battery Low
Red light off Battery Good
Orange light steady on Battery Charging
2.3 Power Button
Action Function
Press and hold power button for 1 second (if off) Power On
Press and hold power button for 1 second (if on) Power Down
2.4 Mini-USB Port
The mini-USB port offers provides two functions:
A.) As a power input to recharge the BT-368i Li-ion battery. It will require 3~4 hours to complete a full charge to
the battery. Connect the included USB charging cable to either an active USB port on a PC, or the included
12VDC car charger or 110VAC wall charger.
B.) As an interface when using the optional USB Data Cable (#11-BT368-001A) to connect the BT-386 as a USG
GPS receiver.