USGlobalsat BT-368i User Manual - Manual (Page 4)

BT-386i
Page 4 of 15
Version 1.1
1.3 Product Specifications
GPS Receiver
Chipset SiRF StarIII
Frequency L1, 1575.42 MHz
C/A Code 1.023 MHz chip rate
Protocol
NMEA 0183 v3.01
(
Default: GGA, GSA, GSV, RMC and can support: VTG, GLL, ZDA with factory
modified firmware ) SiRF binary mode accessable.
Available Baud Rate 4800/9600/14400/19200/38400/57600/115200
Channels 20-channel all-in-view tracking
Antenna Built-in patch antenna
Sensitivity Acquisition:-146dBm, Tracking:-159dBm
Hot Start 1 seconds
Warm Start 38 seconds
Cold Start 42 second
Re-acquisition 0.1 second
Supported DGPS WAAS, EGNOS, MSAS
Position Accuracy Horizontal 10 meters, 2D RMS / 1-5 meters 2D RMS, WAAS corrected
Velocity Accuracy 0.1 meters/second
Time Accuracy 1 micro-second synchronized to GPS time
Altitude Limit 60,000 feet (18,000 meters)
Velocity Limit 1,000 knots (515 meters/second)
Acceleration Limit 4g
Jerk Limit 20m / sec3
Update Rate 1 Hz
Bluetooth
Version 2.0
Range 10 Meter (Class 2)
Support Profile SPP Profile
Physical Characteristics
Dimensions 2.75” x 1.57” x 0.36” (70 x 40 x 9.2 mm)
Weight 0.06 lb (30g)
DC Characteristics
Power Supply 5 VDC
Battery Rechargeable Li-ion, 700mAH
Battery Life 10 Hours
Operating Current 70mA
Environmental Range
Humidity Range 5% to 95% non-condensing
Operation Temperature
14°F ~ 140°F (-10°C ~ 60°C)
32°F ~ 113°F (0°C to 45°C) while charging
Storage Temperature -4°F ~ 158°F (-20°C to 70°C)