Actiontec MI424WR (GigE) - Manual (Page 137)

134
Actiontec Wireless Broadband Router User Manual
135
Chapter 8 Using Advanced Settings
The host can choose to renew an expiring lease or let it expire. If it chooses to
renew a lease, it will also receive current information about network services, as
it did with the original lease, allowing it to update its network configurations to
reflect any changes that occurred since it first connected to the network. If the host
wishes to terminate a lease before its expiration, it can send a release message to the
DHCP server, which will then make the IP address available for use by others.
The Router’s DHCP server:
• Displays a list of all DHCP hosts devices connected to the Router.
• Defines the range of IP addresses that can be allocated in the network.
• Defines the length of time for which dynamic IP addresses are allocated.
• Provides the above configurations for each network device and can be con-
figured and enabled/disabled separately for each network device.
• Can assign a static lease to a network computer so that it receives the same IP
address each time it connects to the network, even if this IP address is within
the range of addresses that the DHCP server may assign to other computers.
• Provides the DNS server with the host name and IP address of each com-
puter connected to the network.
To view a summary of the services currently being provided by the DHCP
server, click IP Address Distribution in the Advanced screen. The “ IP Address
Distribution” screen appears.