Actiontec MI424WR (GigE) - Manual (Page 24)

20
Actiontec Wireless Broadband Router User Manual
21
Chapter 3 Configuring My Network Settings
3. If website blocking needs to be active all the time, select “Always” from the
“When should this rule occur?” drop-down list. If the rule will only be active at
certain times select “Specify Schedule” and click Add. Then, add a schedule rule
(for more details about schedule rules, see the “Advanced Settings” chapter of
this manual).
☞
Note: Make sure the Router’s date and time settings for your
time zone are set correctly.
4. Click OK to add the website to the table. The previous screen appears while
the Router attempts to find the site. “Resolving...” appears in the “Status” col-
umn while the site is being located.
5. If the site is successfully located, “Resolved” appears in the Status column. If
not, “Hostname Resolution Failed” appears. Click Refresh to update the status
if necessary. If the Router fails to locate the website, do the following:
• Use a web browser to verify the website is available. If it is, the website
address was entered incorrectly. See “Modifying a Website Address,” below.
• If the website is not available, return to the Website Blocking screen at a
later time and click Resolve Now to verify the website can be found and
blocked by the Router.
Block Internet Services
Internet services blocking is used to prevent a device on the network from access-
ing particular services on the Internet, such as receiving E-mail or downloading
from
FTP sites. To set up Internet services blocking on a networked device, locate
the device in the My Network column, then click Block Internet Services. The
“Add Access Control Rule” screen appears.
1. If this access control rule applies to all networked devices, select “Any” from
the “Networked Computer/Device” list box. If this rule applies to certain
devices only, select “Specify Address” and click Add. Then, add a network
object (for more details about adding network objects, see the “Advanced
Settings” chapter of this manual).