Actiontec MI424WR (GigE) - Manual (Page 33)

30
Actiontec Wireless Broadband Router User Manual
31
Chapter 4 Creating a Wireless Network
Configure Wireless Access Point
Click Advanced at the bottom-right of the Wireless Setup screen to generate the
“Configure Wireless Access Point” screen. The top half of the screen is shown in
the figure, below:
General
This section displays general communication parameters of the Router’s wireless
connection. Actiontec recommends not changing the default values in this sec-
tion unless the user is familiar with these networking concepts.
Status Displays the status of the wireless connection.
When should this rule occur? Displays the time during which the rule is active. To
configure schedule rules, see chapter 9, “Advanced Settings.”
Network Select the type of connection being configured from this drop-down
list (options: LAN, WAN, or DMZ).
LAN stands for local area network, which
is another name for the home or office network. WAN stands for wide area net-
work, and, in this case, describes the Internet.
Connection Type Displays the type of connection.